Well Logs Module

TabLogs lets users document well log results into the log report

Users will see a table once Well Logs is accessed.

e.g.:



Users can press the Add buttons to add logged well results on the table, or they can click Bulk Edit to enter multiple results at once.

Backfill Log - Users need to input the depth and select a backfill type between Blank, Backfill, Bentonite, Filter Pack, Concrete Cement, Grout.
If the backfill type is not present, users may add a new one by simply clicking the gear button.



Users need to input the backfill type name and select the graphic.
Well Log - Users need to input the depth and select the well ID given or add a new ID if necessary and add the well type between 50mm PVC Solid or 50mm PVC Slotted.
If the well type is not present, users may add a new one by simply clicking the gear button.



Users need to input the well type name and select the graphic.
Well Cover - Users only need to select the well ID and well cover.
If the well cover is not present, users may add a new one by simply clicking the gear button.



Users need to input the well cover name and select the graphic.
Well Probes / Well Instruments - Users need to input the depth and select the well ID and the probe type.
If the probe type is not present, users may add a new one by simply clicking the gear button.



Users need to input the probe type name and select the graphic.
Well Casing - Users need to input the depth and select the casing type.
If the casing type is not present, users may add a new one by simply clicking the gear button.



Users need to input the casing name then determine if regular casing or surface casing, and then select the graphic.

Updated on: 14/01/2025