In-Situ Tests Module

TabLogs has a prebuilt in-situ test module, with optimised UI for standard in-situ tests.
For all in-situ test you can control:
The graphic used in your log reports
The default sample type, if any, created with each test
If you would like to offer logging of a subsurface profile from inside the

DCP - Users can select a measurement interval in the dropdown menu for DCP testing result
SPT - Users can select an interval based on the SPT result. SPT N can be split into a Label and a Value field, this is controlled via a toggle in Settings/Log Settings/In-Situ Tests
PP - Users can input the depth and PP reading for PP testing result.
UCS - Users can input the depth and UCS reading for UCS testing result.
PSP - Users can input the blow count for PSP testing result.
ASS - Acid sulfate testing samples will automatically be shown here once logged in the Samples tab.
CPT - Users may be able to download a template on CPT testing results tab.
DPSH - Users can select a measurement interval in the dropdown menu for DPSH testing result.
SV - Users need to input the depth, peak, and residual for SV Testing Results
PID - Users need to input depth and PPM for PID testing results.

See video:

Updated on: 14/01/2025