Borelog Report: Scale Display Type
TabLogs support multiple types of scale columns, used to display Depth and Elevation in your log report. You can multiple scales in the report and they can be set to imperial or metric regardless of the units applied in Log Configurations
Depth
Elevation: factors in the azimuth and elevation of your log
Elevation/Depth
Vertical Depth: this is the elevation delta from the start of the log
Depth Markers:
After choosing your column type you can choose what triggers you would like to show data inside the column:
There are multiple marker logics, these can be multiselected:
Subsurface Origin
This will set the depth markers as per soil origin.
This is example setting Depth Markers to subsurface origin. Subsurface Origin presents markers with same soil origin. The markers are placed at the depth corresponding to the last layer per soil origin.
Subsurface Type
This will set the depth markers to all layers in the Subsurface.
This is example setting Depth Markers to subsurface type. Subsurface Type presents markers to all layers see the sample example below.
Depth Scale
This will set the scale label which also present the major and minor spacing count
Major: The label which includes the number e.g. 1 m
Minor: The smaller ticks between the Major ticks.
Please note you can choose one, two or select all.
TabLogs also supports adding Graphics to the depth column as seen in the above image.
Note for this option to be present column type must = configurable it cannot be the default scale columns with your logs.
Depth
Elevation: factors in the azimuth and elevation of your log
Elevation/Depth
Vertical Depth: this is the elevation delta from the start of the log
Depth Markers:
After choosing your column type you can choose what triggers you would like to show data inside the column:
There are multiple marker logics, these can be multiselected:
Subsurface Origin
This will set the depth markers as per soil origin.
This is example setting Depth Markers to subsurface origin. Subsurface Origin presents markers with same soil origin. The markers are placed at the depth corresponding to the last layer per soil origin.
Subsurface Type
This will set the depth markers to all layers in the Subsurface.
This is example setting Depth Markers to subsurface type. Subsurface Type presents markers to all layers see the sample example below.
Depth Scale
This will set the scale label which also present the major and minor spacing count
Major: The label which includes the number e.g. 1 m
Minor: The smaller ticks between the Major ticks.
Please note you can choose one, two or select all.
Adding Graphics to Scale Column
TabLogs also supports adding Graphics to the depth column as seen in the above image.
Note for this option to be present column type must = configurable it cannot be the default scale columns with your logs.
Updated on: 10/12/2024
Thank you!